• <noscript id="4g2ig"><source id="4g2ig"></source></noscript>
  • <table id="4g2ig"><noscript id="4g2ig"></noscript></table>
  • <td id="4g2ig"><noscript id="4g2ig"></noscript></td>

    推薦產品

    +86-10-81595615

    當前位置 : 首頁 > PBN Products > 熱解氮化硼

    1.  Product Instruction

          Pyrolytic Boron Nitride (PBN) is a kind of advanced ceramic, can be produced with 99.999% purity in high density. It made by ammonia and       Boron halide through Chemical Vapor deposition(CVD) process in high temperature and high vacuum condition:NH3 +BX3=BN+3HX , it can         be produced as PBN plates, and also can be produced as PBN final products directly like crucible, boat, coating, etc.
                   

    2.  Main Features

          It’s different from BN, there is no traditional process of hot pressing, no need any kinds of agglutinant, so the products have very obliviously       features as follow:

    1.        ●  Non-toxic and tasteless
    2.        ●  High purity(>99.999%)
    3.        ●  No reaction with acid, alkali, salt and other organic reagent at room temperature
    4.        ●  A little corrode in melt salt and alkali, but it can resistance any kind of acid in high temperature.
    5.        ●  No reaction with melt metal, semiconductor and other compound.
    6.        ●  Excellent oxidation resistant below 1000℃
    7.        ●  Excellent thermal shock resistance
    8.        ●  Can be used in high-temperature, no sublimation point, will be decompose into B&N
    9.        ●  High electrical resistance, good electrical insulating property
    10.        ●  Smooth surface, pore-free, not melt with most of semiconductor
    •  
    • 3.  Product Application
    1.        ●  Crystal growth (VGF, LEC Crucible)
    2.        ●  Molecular Beam Epitaxy(MBE) Crucible
    3.        ●  Polycrystalline Synthesis Boat
    4.        ●  OLED and MBE Effusion Cell
    5.        ●  MOCVD Heater
    6.        ●  PBN Infrared Window
    7.        ●  Traveling Wave Tube (TWT) (PBN Support Rod)
    8.        ●  PBN Coating Graphite
    9.        ●  High temperature, vacuum equipment insulator
    •  
    • 4.  Parameter of PBN
    •  
    Properties Units Values
    Density g/cm3 1.95-2.20
    Tensile Strength MPa 112
    Bending Strength MPa 173
    Compression Strength MPa 154
    Young's Modulus GPa 18
    Thermal Conductivity W/m°C "a" 60     "c" 2
    Specific Heat J/g·℃ 0.90(RT)
    Resistivity Ω.cm 2×1015
    Dielectric Strength D.C. volts/mm 2x105
    Dielectric Constant   "c" 3.07
    Metal Impurity Content ppm <10
     

     

    亚洲精品国产,91嫩草影院,99久久这里只有精品免费6,五月天婷五月天综合网
  • <noscript id="4g2ig"><source id="4g2ig"></source></noscript>
  • <table id="4g2ig"><noscript id="4g2ig"></noscript></table>
  • <td id="4g2ig"><noscript id="4g2ig"></noscript></td>